Friday, June 6, 2014

How to Disable the Airbag Light on a Ford Mondeo

How to Disable the Airbag Light on a Ford Mondeo

The airbag warning light in a Ford Mondeo may illuminate when the airbag is malfunctioning. After you have had the airbag assembly looked at by a mechanic and fixed, you need to reset the airbag or SRS warning light on your Mondeo. You need to purchas a diagnostic reset tool from your dealership or any auto parts store to do this job.

Instructions

    1

    Locate and open the fuse panel which can be found underneath the steering column on the dashboard. Pull down on it from the top with your fingers.

    2

    Plug the connector end of the diagnostic reset tool into the pinned receiver port on the fuse panel.

    3

    Put the key into the ignition and turn it to the "II" position. Wait for the diagnostic reset tool to stop blinking. This means the SRS light has been reset.

    4

    Unplug the diagnostic reset tool and turn off the vehicle.

    5

    Turn the engine on and verify that the SRS light has shut off of the instrument panel.


No comments:

Post a Comment

Note: Only a member of this blog may post a comment.