For U Solution

How to Replace the Remote for a DVD in Odyssey

The remote for the Odyssey DVD player that is built into Honda automobiles is smaller than most hand-held remotes, but functionally it is the same as those used to control DVD players and television sets. To replace a lost Odyssey remote, acquire a universal remote from an electronics store and program it with the codes that will enable it to control the Odyssey.

Instructions

1

Put batteries in the universal remote.

2

Locate the code for the Honda Odyssey DVD player in the list provided with the universal remote; the list may be found in an instruction manual or on the manufacturers website, or at a website that specializes in providing codes for various devices to universal remotes (see Resources). Memorize the code.

3

Press the "DVD" button on the universal remote. Press and hold the "Setup" or "Program" button, depending upon the remotes manufacturer. Release the button when the buttons on the remote blink twice.

4

Press the numeric keys on the universal remote to enter the number that you memorized. The buttons will now blink twice again. If the buttons do not blink, let 10 seconds pass before repeating the entire procedure again.

5

Press the "DVD" button on the universal remote. Insert a DVD into the front loading slot of the Odyssey DVD player. Press the "Play" button on the universal remote to start playing the DVD.

Posted by Unknown at 9:30 AM

Email ThisBlogThis!Share to TwitterShare to Facebook

Labels: a, dvd, for, how, in, odyssey, remote, replace, the, to