For U Solution

How to Install a Honda Accord Projector Light

The headlights on a car can become faded over time. You can easily replace the headlights on a Honda Accord with projector lights. Projector lights provide more visibility with a wide range of light showing, and are especially useful when driving at night. You install the projector lights in the same manner as the regular headlights.

Instructions

1

Open the hood of the Honda Accord. There is usually a button inside of the car. Push the button to release the hood. A latch is located in the middle of the hood underneath the edge. Push the latch and then lift up the hood. Make sure the hood is held up securely with the holder in the car, or by some other means, to ensure the hood does not fall when you are under it.

2

Use a 10 mm wrench to loosen the bolts on top of the bumper to remove it. Once the bumper is removed, put it to the side.

3

Disconnect the wires that are on the back of the headlights. Remove the bulbs from the inside of the lens assembly. Remove these by turning and pulling them out.

4

Loosen the bolts on the top and bottom of the lens assembly and remove it using a 10 mm wrench.

5

Insert the projector light in the same place you just took out the headlights, and screw it in using the same bolts you just removed. Connect the wires to the back of the projector light with the wires you just disconnected from the headlight, and then put the bulbs back into place.

6

Test the lights to make sure they work. If you are satisfied, place the bumper back on the car by putting it back into the same position, align the bolts and asten them using the 10 mm wrench.

Posted by Unknown at 8:15 AM

Email ThisBlogThis!Share to TwitterShare to Facebook

Labels: a, accord, honda, how, install, light, projector, to