Showing posts with label 150. Show all posts
Showing posts with label 150. Show all posts

Saturday, November 9, 2013

How do I Adjust the Tailgate on a 1991 Ford F 150

The tailgate on your 1991 Ford F-150 is used to keep loaded items secure in the back of the truck bed. If you are having problems with your F-150s tailgate, you probably need to adjust the alignment. This can be done with a couple of tools that you probably have around the house. You dont have to pay for a body shop to adjust the alignment. You can do it yourself.

Instructions

    1

    Lower the tailgate so the gate flat. Use your fingers to detach the retaining cables from the pins on the side of the tailgate. Use a wrench to remove the bolt on the lower right hinge of the tailgate.

    2

    Use a wrench to remove the right hinge pin from the tailgate and then remove the left hinge pin. Pull the tailgate off of the truck.

    3

    Look for the latch strikers on the sides of the tailgate. These connect the tailgate to the truck bed sides. Clean any dirt or debris from the strikers. Use a Torex screwdriver to loosen or tighten the strikers to line them up properly.

    4

    Reassemble the tailgate in reverse order to put back on your F-150.

Continue reading..

Thursday, October 17, 2013

How to Change the Interior Light in a Ford F 150

The interior light on your Ford F-150 helps illuminate the inside of your vehicle whenever you need increased visibility. Located in the upper console, the interior light does occasionally burn out due to wear and tear. Thankfully, it can be replaced easily with a 578/912 replacement bulb. Avoid touching the bulb with your bare hands, as it may damage the bulb. The entire process takes no more than five minutes.

Instructions

    1

    Turn off the F-150 and make sure the lights are off.

    2

    Insert the flat-head screwdriver into the upper consoles cover and pry it downward to remove it from the vehicle.

    3

    Pull the old bulb out of the cover and replace it with a new bulb. Use a clean cloth to install the new bulb to avoid damaging it.

    4

    Snap the upper cover back into place.

Continue reading..