For U Solution

How to Find the Code for My 2000 Honda CR V

You can find the code for your 2000 Honda CR-V right at home. The 2000 Honda CR-V comes equipped with an On-Board Diagnostics I computer (OBD-I) that retrieves and stores trouble codes sent to it from various sensors positioned throughout the vehicle. When the computer receives a code, it illuminates a service or warning light on the instrument panel. You can retrieve these codes with a small, computerized device called an OBD I code scanner, available at auto-parts stores or online.

Instructions

1

Find the OBD port on the underside of the drivers-side dashboard near the steering column. Its the same size and shape as the end of the OBD-I code scanner.

2

Plug the scanner into this OBD port.

3

Put the key into the ignition and turn it to the "ON" position, but dont start the engine.

4

Wait for the scanner to turn itself on. Some code scanners have to be manually turned on, so you may have to find the "on/off" switch.

5

Select the command "Retrieve Codes" or something similar -- it varies by scanner brand -- and wait for the code scanner to carry out the command. Write the codes it retrieves down on a piece of paper.

6

Look up the codes in the scanners manual. Unplug the scanner from the port and have the vehicle serviced or repaired based on the diagnostic information obtained from the codes.

Posted by Unknown at 6:30 PM

Email ThisBlogThis!Share to TwitterShare to Facebook

Labels: 2000, code, cr, find, for, honda, how, my, the, to, v