For U Solution

How to Restore a Vintage Steering Wheel

Restoring an old car involves cleaning and repairing every area of the vehicle, including the steering wheel. Vintage steering wheels feature a metal or plastic wheel with a plastic, vinyl or leather covering. Steering wheels go through a lot of wear and tear from routine use, which results in cracks, scratches and other damage to the outer covering. Restoring your old vintage steering wheel repairs those cracks, making the wheel look new again.

Instructions

1

Remove the steering wheel, and place on a flat surface covered with old newspaper. Open the epoxy, and mix the two parts, following the manufacturers recommendations. Dip the craft stick into the mixture, and smooth over any scratches, dings or chips on the wheel.

2

Rub the epoxy areas with 100-grit sandpaper, once the epoxy cures for at least 24 hours. Smooth the edges of the epoxy, before moving to the 220-grit sandpaper. Use the higher grits until the epoxy sits flush and even with the steering wheel.

3

Turn the steering wheel over in your hands, looking for any imperfections on the wheel. Cover those areas with a thin layer of auto primer. Once the primer dries, lightly sand the surface with 220-grit sandpaper, creating a smooth surface.

4

Paint the repaired areas of the steering wheel with auto paint or epoxy paint. Lightly feather out the edges of the paint with your fingers, making the new paint blend with the original color of the cover on the steering wheel.

5

Dip a piece of aluminum foil in distilled white vinegar, and rub it briskly across any chrome or metal decorations on the steering wheel. The combination removes any rust, pitting or other damage on the chrome and gives the steering wheel its naturally bright and shiny appearance.

Posted by Unknown at 8:30 PM

Email ThisBlogThis!Share to XShare to Facebook

Labels: a, how, restore, steering, to, vintage, wheel