For U Solution

Windshield Wipers Wont Work on My 2000 Buick Park Avenue

Like most passenger cars, the windshield wipers on a Buick Park Regal can stop working for a number of reasons. Most wiper problems can be traced to an electrical failure. Some are simple to detect, diagnose and repair; others may require a voltmeter and an intermediate knowledge of electrical systems.

Instructions

1

Located the fuse box underneath the drivers side of the dashboard. Replace the two fuses that controls the wiper switch and wiper motor. Both fuses are located on the next-to-last row, with a blank fuse holder between them. Test the wipers.

2

Check to see if the vehicles turn signals are working. Since the turn signal is located on the same switch as the windshield wiper, the switch may need replacing. Its possible for the turn signal to be working if the windshield wiper is not working, but its unlikely that both stop working at the same time without a switch problem.

3

Inspect wiring underneath the dashboard and hood. Use a small flashlight to look for frayed or broken wires. Debris and regular wear-and-tear can damage wires. Reconnect broken wires, being careful to wrap them in electrical tape, or replace them entirely.

4

Check the windshield wiper linkage, or the part that moves your Park Avenues wiper blades. If the linkage is bent or damaged, replace it.

5

Lift the hood, turn the wipers on, and listen for the motor located underneath the wiper linkage. If you cant hear the motor, it may needs replacing.

Posted by Unknown at 5:15 AM

Email ThisBlogThis!Share to XShare to Facebook

Labels: 2000, avenue, buick, my, on, park, windshield, wipers, wont, work