For U Solution

How to Replace a Fog Light Bulb on a 1998 Jeep Wrangler

The fog lights on your 1998 Jeep Wrangler are not merely an aesthetic addition to your vehicle; the lights serve to provide additional visibility in low-light, humid and foggy weather conditions. Your fog light bulb needs to be replaced if it is dim, flickers or has ceased to work completely. You can replace the fog light bulb, and maintain the safety of your Jeep, using a simple Philips screwdriver.

Instructions

1

Disconnect the negative battery terminal cable from the Jeep Wranglers battery.

2

Disconnect the electrical plug that connects to the back of the fog light bulb by pinching the release tab and pulling back on the plug.

3

Turn the bulb counter-clockwise to remove it from the fog light housing assembly. Remove the bulb carefully to avoid breaking it inside of the fog light.

4

Insert the new fog light bulb and gently turn it clockwise until it does not turn anymore. Connect the power plug to the back of the bulb, pushing in until the tab on the connector snaps into place.

5

Reconnect the negative battery terminal cable.

6

Turn on the vehicles lights to verify the fog light works.

Posted by Unknown at 12:00 AM

Email ThisBlogThis!Share to XShare to Facebook

Labels: 1998, a, bulb, fog, how, jeep, light, on, replace, to, wrangler